LEADALLWAY Heavy Duty Outboard Boat Motor Stand - Adjustable Engine Carrier Cart & Dolly for Storage, Maintenance & Transport | Perfect for Marine Workshops, Boat Yards & DIY Enthusiasts

Feature Antirust and Waterproof Ergonomic Handles Solid Steel Construction Multi Purposed 150KG bearing power Introduction LEADALLWAY Boat Motor Stand Cart is suitable for service, maintain and storing boat motor. It is ideal for storage in the garage or maintenance & repairs in the Shop. Large hard rubber wheels,providing a solid foundation for carrying outboard motors. This motor carrier is antirust and waterproof for its powder coated finish. It could effectively protect motor from rust and prolong lifespan. Thick Wood Board Made of solid wood, more sturdier for holding the outboard motor Ergonomic Handles Reduce arm and wrist strain when moving the cart,easier to use Swivel Caster Wheels Make the cart easy to steering and transport Side by Side Rear Wheels Improve its weight capacity and move the cart more smoothly Triangular Srtucture The center of gravity is very stable, avoiding the cart dumping,More convenient and safe to use Easy Installation Please follow the installation instructions to install, Installation can be completed in only 7 steps Max Load 330 lBS Heavy-duty construction can withstand weights of up to 150KG,tubes are not easily deformed Outboard Motor Stand Outboard Motor Stand Folding 210D Pontoon Boat cover 17-20FT/21-24FT 600D Pontoon Boat cover 17-20FT/21-24FT Convertible Hand Truck Aluminum Heavy Duty 3-in-1 Platform Truck 880lbs Add to Cart Add to Cart Buying Options Buying Options Add to Cart Add to Cart Customer Reviews 3.9 out of 5 stars 1,344 3.9 out of 5 stars 1,344 3.8 out of 5 stars 94 3.7 out of 5 stars 45 4.2 out of 5 stars 1,622 4.4 out of 5 stars 586 Price $89.99$89.99 $87.99$87.99 — no data — no data $289.99$289.99 $129.99$129.99 Size 15-30HP 5-15HP 17-20FT 17-20FT 770lbs Max Capctiy 880lbs Max Capctiy Weight 10.98KG 6.5KG 3.1KG 8.9KG 18KG 14.8KG Material Iron+Wood Iron+Wood PVC PVC Aluminum Alloy Steel

Easy to install and uninstall, collapsible, light weight outboard motor stand

Sturdy steel cart frame is capable to load 154lb, and the screw and pins on the carrier is made by 304 stainless steel

Ergonomic handles make the cart easy to steering and transport

Two 5.9 inches wheels fits for all terrains, which makes the motor transport more convenient

The carrier has mufti-purpose, which is not only for transport, but also for display and repairing

****** - Verified Buyer

4.5

This is a perfectly serviceable stand that you will be happy with as long as your expectations aren't too high.I bought it to be able to easily move my 9.9hp outboard around the garage and into the driveway, and it serves that purpose well I would not use this stand on sand or gravel, or for carting your engine long distances. And I probably wouldn't use this stand for a 20 or 30hp engine either. If you're looking to use it for those things you shouldn't be looking at this price point.This is poorly manufactured for weight bearing. While the V irons are substantial and bear the weight of the axle, the uprights are not fully supported because the assembly holes will not line up at the U shaped piece on the front. In order to make it fit you have to keep all the bolts very loose to give you the slack necessary to make all the holes line up. Once you do you'll see that the uprights are not fully cradled in the V irons. As a result, the weight is borne less by the V irons and more by the bolts through the thin wall of the tubing. This is why I wouldn't put anything much heavier than a 15hp engine on it.Tips for assembly:There are three different lengths of bolts, two of which are so close that it isn't apparent when you have hardware laid out.4 short bolts for the V Irons10 long bolts4 extra long bolts for the wood boardThe long bolts and extra long bolts are so close in size that you can mix them up so try testing them through the wood board and the upright tube. Only four of them will fit through with enough thread left to screw on the nut.As you're assembling it leave everything super loose; do not tighten down any of the nuts. You'll need everything loose so that you can get all the holes lined up. If you even "hand tighten" the nuts you'll run into a problems later. Just thread the nuts on the bolts enough so that they don't fall off. Then when everything is together you can go back and tighten everything down.

LEADALLWAY Heavy Duty Outboard Boat Motor Stand - Adjustable Engine Carrier Cart & Dolly for Storage, Maintenance & Transport | Perfect for Marine Workshops, Boat Yards & DIY Enthusiasts

Lightning Delivery

Hassle-Free Returns

Secure Shopping

24/7 Concierge

LEADALLWAY Heavy Duty Outboard Boat Motor Stand - Adjustable Engine Carrier Cart & Dolly for Storage, Maintenance & Transport | Perfect for Marine Workshops, Boat Yards & DIY Enthusiasts

DESCRIPTION

FEATURES

REVIEWS

YOU MAY ALSO LIKE

BotaBay Heavy Duty Folding Punching Bag Stand with Pull-Up Bar - Portable Free Standing Boxing Stand for Home Gym, MMA Training & Fitness Workouts - Perfect for Indoor & Outdoor Use (Stand Only)

LEADALLWAY Heavy Duty Outboard Boat Motor Stand - Adjustable Engine Carrier Cart & Dolly for Storage, Maintenance & Transport | Perfect for Marine Workshops, Boat Yards & DIY Enthusiasts

Lightweight Folding Golf Push Cart with Adjustable Bag Stand | Portable Golf Cart for Men & Women | Perfect for Golf Courses, Driving Range & Outdoor Practice